Switching On Or Off The Phone - Samsung SCH-A725 User Manual

Dual band cdma phone
Table of Contents

Advertisement

Getting started
3. Plug the adapter into a standard AC wall outlet.
The LED on the charger indicates the charging
progress by the following colors:
• Red: the battery is being charged.
• Green: the battery is fully charged.
• Orange: the battery is not correctly plugged
in or is operating at a too high or too low
temperature.
4. When charging is finished, unplug the adapter
both from the power outlet and from the
charger.
5. To remove the battery, push and hold the
battery catch and lift away the battery.
20
Low battery indicator
You can easily tell if your battery needs to be
recharged by checking the Battery Status icon
(
) at the upper-right corner of your phone's
display. The presence of all three bars indicates a
full charge, two bars indicates a smaller charge,
and one bar indicates an even smaller charge.
When the battery charge level becomes low, the
battery sensor blinks an empty Battery Status
icon (
) and sounds a warning tone. If the
battery level becomes too low, the phone
automatically turns off. When this happens, you
lose whatever you are doing and your phone call
cuts off. Watch the Battery Status icon and make
sure that your battery is adequately charged.

Switching on or off the phone

1. Open the phone.
2. Press and hold
until the power-on image
displays to switch the phone on.
3. If the phone asks for a Personal Identification
Number (PIN), enter the PIN code supplied
with the UIM card. For further details on the
PIN code, see page xx.
The service light on the phone flashes and an
alert sounds. When the system locates
services, the greeting message displays along
with the date and time. You can now place and
receive calls.
Getting started
21

Advertisement

Table of Contents
loading

Table of Contents