Nikon Z 7 Technical Manual page 7

2
Enable N‑Log recording.
Return to HDMI > Ad‑
vanced in the setup menu
and select On (cannot
record to card) for N‑Log
setting. Note that N‑Log
footage is recorded only to
the external device, not to
the camera memory card.
3
Configure the recorder for HDMI input.
For details, see the documentation supplied with the
device.
4
Start filming.
If On is selected for HDMI > Advanced > External re‑
cording control in the camera setup menu and the
recorder supports the Atomos Open Protocol, you can
start and stop recording using the camera movie‑re‑
cord button
enable recording on the external device. Contrast can
be enhanced for display on the camera during record‑
ing (view assist;
When the camera standby timer expires, the monitor
will turn off and HDMI output will end. Choose No
limit or a time longer than the anticipated recording
time for Custom Setting c3 (Power off delay) > Stand‑
by timer.
(page 10); otherwise, you will need to
page 11).
7