This Operation Manual is frequently updated to ensure safe use of your product. Visit www.seatingmatters.com where you can find a free copy of the most up to date version. CONTENTS Safety instructions Technical Specification User Guide and Operating Instructions Working Environment Seating Matters Recycling Policy Intellectual Property Maintenance and Servicing ATLANTA™ Instruction Manual...
2. The User must ensure that the product is in good condition before use (check all nuts and bolts are fastened, fabric in good condition etc). If there are any problems, these must be reported to your Seating Matters provider and corrected before the chair is put into use.
Page 5
7. The product must be used on a level, plain, hard surface with the brakes engaged to avoid it moving during use and to ensure stability. When the ATLANTA™ is not in transit, all the braking castors on the product must be engaged to prevent risk of injury when being used.
30° range iii Leg rest angle 75° - 107° 32° range iv Integrated tilt and recline 54° - 74° 20° range Chair weight unloaded is 67 Kg/147.71 lb/10.56 Stone. Chair user weight limit is 159 Kg/364 lb/25 Stone ATLANTA™ Instruction Manual...
(fig.1) • Braking castors: The ATLANTA™ chair must be used on a plane, hard surface with the brakes engaged to ensure stability and to avoid the device moving undesirably during use. Braking castors, where provided, must be in the braked position while in use. (fig.1)
Page 8
Seat belt loops (fig.2a) • Chair movement: To move the chair around, ensure that the back is in a fully upright position and push using the push handle on the back. Only a competent person should move this chair. ATLANTA™ Instruction Manual...
Page 9
• Leg Rest: A variable angle leg rest can be used with the ATLANTA™ chair. When the leg rest is used, please ensure that it is attached securely onto the chair using the buckle attachments on both arms of the chair. (fig.3a) Ensure that only the weight of the Patient's legs are placed on this leg rest.
Page 10
• Seat cushion: The seat cushion on the ATLANTA™ is a waterproof, pressure reducing, breathable, medium foam cushion can be added for pressure relief and comfort in the chair. The seat cushion will have Velcro on one face and a zip closure to the rear.
Failure to do this may result in damage to the polyurethane coating, react with the chair frame, or negate the biocompatibility results of the fabric. It is essential that articles be thoroughly dried after all cleaning procedures and before storage. ATLANTA™ Instruction Manual...
• Contact your local authority or governmental agency for the regulations that apply in your area. • If you wish to have Seating Matters recycle your product and your behalf, you are welcome to return the product to our company.
1988 safety regulations. Regional Variations The device referred to as a "ATLANTA™" is a Seating Matters product category and the information included in this document reflects common features of this group of products. In some regions of the world, we supply product design variations of similar function and ease-of-use but with alternative specifications or reinforcements.
Page 14
Parts can only be changed by service persons trained in Seating Matters products and use only Seating Matters parts. We recommend that your chair is serviced every year by a Seating Matters approved provider for any running repairs and maintenance.
Page 15
VIEW OUR FULL RANGE OF CHAIRS & ACCESSORIES ONLINE WWW.SEATINGMATTERS.COM ATLANTA™ Instruction Manual...
Page 17
WE ARE HERE TO HELP For any questions or queries regarding your Seating Matters chair please email : contact@seatingmatters.com...
Page 18
Australia Canada N.Ireland & ROI 2/6 St James Place 269 Maplegrove Rd 131 Carnamuff Road Seven Hills, Colborne Limavady NSW 2147 ON, Canada Northern Ireland Australia K0K 1S0 BT49 9JG Tel: +61 1300 001 050 Tel: +1 (905) 507 9007 Tel: +44 (0) 28 777 666 24 australia@seatingmatters.com...
Need help?
Do you have a question about the ATLANTA and is the answer not in the manual?
Questions and answers