Wake-Up Profile - Philips HF3650 Quick Start Manual

English
Quick start guide
When you use the Sleep & Wake-up light for the first time, you need to set up basic functions of the
appliance. Set the general settings like language and time first. After that you can set one wake-up
profile and one unwind program.
Note: The settings are only saved if you tap on the check mark.
1 Place the Sleep & Wake-up light at approximately 16-20in / 40-50cm from your head, on a flat
stable surface of your bedside table.
2 Attach the DC-jack into the appliance and plug the adapter in the wall socket.
Settings

Wake-up profile

In your wake-up profile, you can set your alarm, the maximum light intensity and the type of wake-up
sound you prefer.
If you select the radio function, you can select and save your preferred radio station. You can still
change the radio station after this setup.
1 Start the setup wizard by tapping on the start icon.
2 You will be guided though the setup wizard on the Sleep & Wake-up
light.
Note: The wake-up profile and the relaxation program can be set later. Skip
these settings by tapping the arrow repeatedly. However, we advise you to
set your wake-up profile and your relaxation program during this setup. This
can help you explore the different functions of the appliance.
Select your language.
Set the clock time.
Set the time you want to wake up.
Select the preferred maximum light intensity. The lamp of the
appliance simulates a sunrise by gradually increasing in
brightness.
The default duration of the brightness increase to the maximum
intensity is 30 minutes.. You can change the duration in the alarm
setting menu after this set up has been completed.
Select the type of sound. You can either choose a natural sound,
radio or no sound.