Advertisement
CLEANING AND STORAGE
A. Flush System
Flush arm, tray, and tubing systems with fresh, distilled water. Using distilled water will reduce
the risk of bacterial growth that can damage your simulator and void the warranty.
B. Reusing Artificial Blood
Artificial blood can be drained from the system and replaced into the provided bottle for reuse
during the next immediate training session. Using distilled water and refrigerating after use
will prolong the shelf life of artificial blood; however, care should be taken to avoid the use of
water/blood mixture that has become dingy or discolored. It is recommended that artificial
blood mixture not be stored for more than two weeks in order to avoid contamination which
could damage your product and void your warranty. For best results, use fresh blood mixture
for every training session.
C. Cleaning
Clean the surface of the arm, as well as the tray, with mild liquid detergent and water.
Ensure all pinch clamps on tubing are open before storing. This will prevent kinks and damage
to the tubing.
Stubborn stains may be removed using Nasco Cleaner (LF09919U, sold separately). Simply
dispense the Nasco Cleaner to the stained area and wipe clean with a soft cloth.
Return all components, clean and dry, to case for storage.
CAUTIONS
DO NOT allow "blood" to dry on simulator — it may stain the skin.
DO NOT clean the simulator with solvents or corrosive material, as they will damage it.
DO NOT place simulator in contact with any printed paper or plastic. The ink will transfer and
cause an indelible stain. Similar inks, such as ball-point pen will also cause an indelible stain.
DO NOT store the simulator with fluids inside or allow fluids to stagnate inside the simulator.
SUPPLIES/REPLACEMENT PARTS
LF00845U Artificial Blood Powder (Quart)
LF00846U Artificial Blood Powder (Gallon)
LF01022U
Fluid Supply Stand
LF01130U
Fluid Supply Bag (Yellow tape and luer lock fitting not included.)
7
Advertisement
