Advertisement
E
F
B
A
C
D
B. Attaching Fluid Supply Bag to Arm
Attach the yellow color-coded connector of the fluid supply bag to the green tubing connector
of the arm (A). Blood flow through veins can be altered using pinch clamps on the arm tubing (B).
C. Attaching Recovery Line for Fluid Replacement
With the white color-coded connector of the squeeze bulb assembly attached to the tray (C),
attach the blue color-coded end to the recovery line with the red color-coded connector (D).
Place the open end of the recovery line into the top of the fluid supply bag above the blood
level (E). Open the pinch clamp on the fluid supply bag (F) and allow blood to pass through
the system.
D. Fluid Flow from Wound Site
As fluid flows from the wound site and collects in the tray, squeeze the bulb to pump blood
back into the fluid supply bag for a continuous flow through the system.
E. Ready for Use
The squeeze bulb must be pumped continuously in order to recover the artificial blood back
into the supply bag.
F. Draining System
Close the pinch clamp on the fluid supply bag. Continue pumping squeeze bulb until artificial
blood has been removed from the system and collected in the fluid supply bag.
Actual product may vary slightly from photo. Nasco reserves the right to change product color,
materials, supplies, or function as needed.
6
Advertisement
