A SYSTEMS DMA8825 User Manual page 18

DMA8825 / DMA8813 / DMA8425 / DMA8413
RM Control
This page offers a number of assignment options for the
Asystems RM remote controls, specifically the RM-6E
(sold separately). Each of the "Keys" listed in this page
will correspond with a button on the RM-6E. Beside each
key users will be able to select the function. This may be
gain control, input/output mute, matrix mixing, etc. The
last field will allow users to select a 'source' related to
their selected function. For example, if "Gain Control" is
selected, users will be able to select which input channel's
gain is adjusted when that key is selected on the remote.
Up to 8 RM-6E remotes can be used at any one time.
Each should be set to a different port to help identify it.
Individual remotes can be locked using the corresponding
buttons within the RM Control menu. Port settings for the
RM-6E can be found on page 8.
Utility
All of the DSP processes can have their settings saved
for later use. While there are a number of factory presets
available, users are always encouraged to find their
own settings and save them for later use� The DMA has
onboard storage for a number of settings to be saved, or
users can connect USB flash drives to save settings.
Also available in the Utility menu is a firmware update
button. When a new version of firmware is available it can
be installed using the "Update" button. Place the firmware
update file on a formatted USB flash drive and insert it
into a USB port. The "Update" button should take care of
the rest. After the firmware is updated, the initialize button
can be selected to reset the device. Save any settings (or
"scenes") before initializing the system.
Protect
The protect menu gives real-time updates on the system
performance� Everything from the system temperature
to the output wattage is represented on this page� If the
Protect LED on the front of the DMA amplifier lights up,
this menu can be viewed to better understand the issue.
English
16