Advertisement
1. BOLTS ARE TIGHTENED TO MORE THAN 90 LB-IN
BUT LESS THAN 200 LB-IN.
2. TIGHTEN BOTH BOLTS (WITH 7/16 BOX END
WRENCH IF AVAILABLE).
3. TIGHTEN EACH BOLT AGAIN TO THE REQUIRED
TORQUE.
EDGE OF
DAMPER
Fig. 5. Internally Mounted Normally Closed Mounting Dimensions in Inches (Millimeters).
TOP VIEW
DAMPER
DRIVE EAR
CLEVIS PIN
CLIP
(P HOLE)
PUSHROD
DETAIL A
Fig. 6. Internal Mounting Normally Closed Damper.
CRANKARM BOLTS
Fig. 4. Crankarm Bolt Tightening.
17
(430)
TRUSS LINK
TRUSS
MOUNTING
LINK
SCREW
PUSHROD
DAMPER
DRIVE EAR
E HOLE
CLEVIS PIN
(P HOLE)
DAMPER
MOUNTING
CLAMP
SHIPPING
STOP
MOUNTING
SETSCREWS
BRACKET
1
1-13/32 INCH (36 MM) REF.
3
MP909E UL LISTED DAMPER ACTUATOR
C8211
3/8 (10) CLEARANCE
6-3/8
(160)
C8210
1
FACEPLATE
PIVOT PLATE
FACEPLATE PARALLEL
TO BACK EDGE OF
MOUNTING BRACKET
C8212
95-6076
Advertisement
