Advertisement
HUAWEI ME919B LTE LGA Module Development
Kit Guide
1. Overview
1.1 Introduction to DVK
The DVK provides a complete solution based on the module. For designers who adopt the module
in their designs, the DVK facilitates their module-based programming and troubleshooting at the
project development stage. The module is welded onto the development board in a manner that is
similar to the surface mounting of chips. The signals output from the module are transferred to the
development board for secondary development.
NOTE:
In the following sections, "module" refers to the ME919Bs-567bN LTE LGA module.
1.2 Setting up DVK
This chapter describes how to set up the DVK to ensure that the module can work normally. As
power of the module can be provided from a 12V power adapter or 5V in USB interface, set up
J305's jumpers in accordance with your power choice. Therefore, there are two powers you can
use in the DVK.
3
Advertisement
