Outline Superfly User Manual page 9

It is important to periodically check the conditions
of the cables and connectors, as they carry voltage
that is potentially dangerous in the event of coming
into direct contact with parts of the body.
The nominal impedance is 16 Ohms for each if the
four power channels. This enables to connect four el-
ements in parallel on the same number of amplifica-
tion channels, thus obtaining optimum energy trans-
fer from the amplifiers to the sound system.
OUTLINE S.R.L.
Via Leonardo da Vinci, 56
25020 Flero (Brescia) Italy
DEFAULT
0.25° ONLY
UPPER SPEAKER
MODEL
TESTED
INPUT
CONNECTION SECT. Pmax
LOWER SPEAKER
A(+)/B(-) LF1 450 W 14.4 ohm
1.5° - 3.5° - 5.5°- 7.5°
C(+)/D(-) LF2 450 W 14.4 ohm
E(+)/F(-) MF 400 W 12.6 ohm
1° - 3° - 5°- 7°
G(+)/H(-) HF 120 W 15.9 ohm
0.5° - 2.5° - 4.5°- 6.5°
0° - 2° - 4°- 6°
Made in Italy
0.25° - REST
Tel.: +39 030.3581341
Fax +39 030.3580431
info@outline.it
SUPERFLY 210
www.outline.it
www.outline.it
MODEL: O SFY210 WEIGHT: 39 kg (86 lb)
& S.N°
WEIGHT
TESTED
S.N°: KKKFT514
Zmin
These checks are also carried out to prevent any
damage to the components and amplifiers, and above
all to avoid faulty system operation.
The components' electroacoustic characteristics
are therefore sized coherently with the aforemen-
tioned criteria to obtain maximum dynamic perfor-
mance from the array, while also ensuring conditions
of extreme reliability and very low distortion. Any con-
figuration other that foreseen will not perform equal-
ly well and, in some cases, could compromise the
correct operation of the sound system.
9
DEFAULT
0.25° ONLY
UPPER SPEAKER
LINK
LOWER SPEAKER
1.5° - 3.5° - 5.5°- 7.5°
1° - 3° - 5°- 7°
0.5° - 2.5° - 4.5°- 6.5°
0° - 2° - 4°- 6°
0.25 - REST
www.outline.it