Kenwood NX-340 Service Manual page 21

Item
(Analog Wide) (1)TEST CH: Low, Center, High (3 point)
(2)SSG output: -120dBm (0.22uV)
AF Freq : 1kHz
Mod Dev : ±3.0kHz
(NXDN Very Narrow) (1)TEST CH: Low, Center, High (3 point)
(2)SSG output: -120dBm (0.22uV)
AF Freq : 1kHz
Mod Dev : ±1.5kHz
(NXDN Narrow) (1)TEST CH: Low, Center, High (3 point)
(2)SSG output: -120dBm (0.22uV)
AF Freq : 1kHz
Mod Dev : ±1.5kHz
5. High RSSI (1)TEST CH: Low, Center, High (3 point)
(Analog Narrow) (2)SSG output: -80dBm (22.4uV)
AF Freq : 1kHz
Mod Dev : ±1.5kHz
(Analog Wide) (1)TEST CH: Low, Center, High (3 point)
(2)SSG output: -80dBm (22.4uV)
AF Freq : 1kHz
Mod Dev : ±3.0kHz
High RSSI (1)TEST CH: Low, Center, High (3 point)
(NXDN Very Narrow) (2)SSG output: -80dBm (22.4uV)
AF Freq : 1kHz
Mod Dev : ±1.5kHz
(NXDN Narrow) (1)TEST CH: Low, Center, High (3 point)
(2)SSG output: -80dBm (22.4uV)
AF Freq : 1kHz
Mod Dev : ±1.5kHz
*Note 5:
(1) Only RX Sensitivity (Semiautomatic) needs to be adjusted (RX Sensitivity does not need to be adjusted again).
Condition
equipment
SSG
Oscilloscope
Audio
Analyzer
SSG
Oscilloscope
Audio
Analyzer
SSG
Oscilloscope
Audio
Analyzer
SSG
Oscilloscope
Audio
Analyzer
SSG
Oscilloscope
Audio
Analyzer
SSG
Oscilloscope
Audio
Analyzer
SSG
Oscilloscope
Audio
Analyzer
Measurement
Test- Unit Terminal Unit Parts
ANT
ANT
ANT
ANT
ANT
ANT
ANT
Adjustment Specifica-
tions
Method
/Remarks
FPU Press [Start]
(Auto tuning)
FPU Press [Start]
(Auto tuning)
FPU Press [Start]
(Auto tuning)
FPU Press [Start]
(Auto tuning)
FPU Press [Start]
(Auto tuning)
FPU Press [Start]
(Auto tuning)
FPU Press [Start]
(Auto tuning)
(No.RA024<Rev.001>)1-21