Step 1.Pick up phone and press “****” to start IVR Step 2.Choose “1”, and FWR7102 report the current WAN port connection type Step 3.Prompt "Please enter password”, user need to input password with end char # if user want to configuration WAN port connection type.
Page 9
If you want to quit by the wayside, press “*”. Step 4.Prompt “operation successful” if password is right and then FWR7102 will be factory setting. Step 5.Press “7” reboot to make changes effective. Step 1.Pick up phone and press “****” to start IVR Step 2.Choose “7”, and FWR7102 report “Reboot”...
Page 10
“ ” “ ” “ ” “ ” To input: D, E, F, d, e, f -- press ‘3’ To input: G, H, I, g, h, i -- press ‘4’ ...
4 Configuring Basic Settings 4.1 Two-Level Management “ “ ” ” “ ” “ ” 4.2 Accessing Web Page 4.2.1 From LAN port ’ ’ Notice: You may either simply set up your computer to get IP dynamically from the router or set up the IP address of the computer to be the same subnet as the default IP address of router is 192.168.1.1.
“ ” “ ” Notice: If you fail to access to the web configuration, please go to “Trouble Shooting” for detecting and solving your problem. 4.2.2 From WAN port ’ ’ “ ” “ ” “ ” “ ” Notice: If you fail to access to the web configuration, please go to “Trouble Shooting”...
4.5.1 Static IP Type the IP address IP Address Type the subnet mask Subnet Mask Gateway IP Type the gateway IP address Address Type in the primary IP address for the Primary DNS Server route Secondary DNS Type in secondary IP address for necessity in the future Server 4.5.2 DHCP...
Set the DNS Mode from Auto and Manual, If user choose manual, you should fill the primary DNS address and Secondary DNS DNS Mode address into Primary DNS Address and Secondary DNS Address. Primary DNS Type in the primary IP address for the route Server Secondary DNS Type in secondary IP address for necessity in the...
Page 17
Assign a specific valid user name PPPoE Account provided by the ISP Assign a valid password provided by PPPoE Password the ISP Confirm Input the password again Password Set the DNS Mode from Auto and Manual, If user choose manual, you should fill DNS Mode the primary DNS address and Secondary DNS address into Primary...
4.6 Setting up the Wireless Connection 4.6.1 Enable Wireless and Setting SSID Click the button to enable or disable wireless. Press to disable wireless. Radio On/Off Press to enable wireless. Network Mode Choose one network mode from the drop down list. Network The name of the wireless name, it can be any text numbers or various special characters.
Choose one SSID from Off-premises 1, off-premises SSID Choice 2 and Premises. Select an appropriate encryption mode to improve the security and privacy of your wireless data Security Mode packets. Each encryption mode will bring out different web page and ask you to offer additional configuration. 4.7 Register 4.7.1 Get the Accounts 4.7.2 Connections...
5.3.1 WAN IP Address Type the IP address Subnet Mask Type the subnet mask Gateway IP Type the gateway IP address Address Primary DNS Type in the primary IP address for the route Server Secondary DNS Type in secondary IP address for necessity in the Server future The page 26 of 58...
Page 27
Set the DNS Mode from Auto and Manual, If user choose manual, you should fill the DNS Mode primary DNS address and Secondary DNS address into Primary DNS Address and Secondary DNS Address. Type in the primary IP address for the Primary DNS Server route Type in secondary IP address for...
Page 28
PPPoE Account Assign a specific valid user name provided by the ISP PPPoE Password Assign a valid password provided by the ISP PPPoE Auto-Dial If or not enable PPPoE Password. Set the DNS Mode from Auto and Manual, If user choose manual, you should fill the primary DNS DNS Mode address and Secondary DNS address into Primary DNS Address and Secondary DNS Address.
5.3.2 LAN Type in local IP address for connecting to a local private Local IP Address network (Default: 192.168.1.1) Type in an address code that determines the size of the Local Subnet Mask network. (Default: 255.255.255.0/ 24) If or not enable DHCP server. Local DHCP Server Local DHCP Server If or not enable DHCP server.
Enter a value of the IP address pool for the DHCP server to end DHCP Ending Address with when issuing IP addresses. Primary/Secondary Input the primary or secondary DNS IP address. You must specify a DNS server IP address here because your ISP should provide you with usually more than one DNS Primary DNS Server.
5.4 Wireless 5.4.1 Basic Select Radio On to enable the wireless, select Radio Off Radio On/Off to disable wireless. Network Mode Choose one network mode from the five types. The name of the wireless name, it can be any text SSID numbers or various special characters.
5.4.2 Security Choose one SSID from SSID, Multiple SSID1, SSID Choice Multiple SSID2 and Multiple SSID3. Select an appropriate encryption mode to improve the security and privacy of your wireless data packets. Security Mode Each encryption mode will bring out different web page and ask you to offer additional configuration.
5.8.2 Firmware Upgrade 1) Choose upgrade file type from Image File and Dial Rule 2) Press to browser file. 3) Press to start upgrading. 5.8.3 Provision Please refer to the provision user manual to test provision. The page 49 of 58 Revision time: 2016-07-07...
Page 50
The page 50 of 58 Revision time: 2016-07-07...
7 Statement FCC Radiation Exposure Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, many cause harmful interference to radio communications.
Page 58
environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause...