Table of Contents
Advertisement
BARTHE
Technology to Advance Education
IV. USE
This device can be used on mains supply or on battery (if battery option).
Using the device on mains supply
Plug the cord of the device on the AC input and on an electrical outlet.
Press ON, ON indicator lights, the unit is ready for use.
To use a wired microphone, plug the microphone into the MIC IN (2) and adjust the volume (12).
To use an external amplifier, connect the LINE OUT (5).
To amplify the sound from an external source, connect the cable to line (4) and adjust the volume.
Using the device on battery
When using the device on battery, unplug the device and switch it on. The LED (22) ligths.
If the battery is not sufficiently charged, the device turns off automatically.
Connect the device to the mains, the device will automatically charge.
Adjusting volume :
During playback press the button
volume.
The return to the original interface will be done if no action is performed for 5 seconds.
Standby :
To pause the MP3 player press and hold the MODE button for 3 seconds.
Selecting the media :
To read a SD/MMC card or a USB device, simply connect it and playback starts automatically To switch
between media, press the MODE button.
Function Bluetooth :
To select Bluetooth, press on the MODE button until to have the Menu Bluetooth, start searching for devices
on your device to connect, select the device named « Bluetooth ».
To return to the NORMAL mode, press on the MODE button until you select the desire media.
Playback mode :
To the change the play mode, press on button
A
D
1
R
IV.1 GENERAL USE
IV.2 MP3 RECORDER
to decrease the volume and hold down the button
Loop all tracks in order on the selected media.
Loop playback of all tracks in the selected folder.
Loop playback of selected track.
Loop playback.
,
www.barthe-audio.com
to increase the
12
Advertisement
Table of Contents
