SMC Networks SMCWEBT-G User Manual page 43

Smc networks wireless ap user guide
Hide thumbs Also See for SMCWEBT-G:
Table of Contents

Advertisement

Parameter
SSID
Channel
MAC Address
Security
Enable WDS
Enable to input MAC address manually (Default: Disable) - Up
to 4 WDS links can be set by specifying their wireless MAC
addresses in the AP MAC Address Table.
Description
The Service Set ID (SSID) is the name of your wireless
network. The SSID must be the same on the Wireless AP and
all of its wireless clients.
This device supports the following modes 11g only, 11b only,
11b/g mixed mode, Super G-Dynamic Turbo and
Super G-Static Turbo.
The media access control address (MAC address) is a unique
identifier attached to each wireless base station.
Displays the security mechanism in use.
Enables the WDS feature. When enabled, up to 4 WDS links
can be set by clicking on the check box. Make sure the same
channel is in use on all devices. (Default: Disable)
H
N
OME
ETWORK
S
ETTINGS
31

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Webt-gEz connect smcwebt-gEz connect g smcwebt-g

Table of Contents