Section 6.1 | Windows 98/Me - SMC Networks SMC2835W User Manual

After clicking [Finish], you will see the following message in your system tray:
6 | Driver Verification
Windows 98SE/Me/2000/XP

Section 6.1 | Windows 98/Me

Step 1: Right-click the My Computer icon on your desktop and click [Properties].
Step 2: Then go to the [Device Manager] tab and open the [Network adapters] section. You
should see your SMC2835W 2.4GHz 54 Mbps Wireless Cardbus Adapter in this menu. Highlight it
and click [Properties].
Step 3: The Device Status shows that the "This device is working properly". If there are any
error messages displayed here, you will need to click the SMC adapter and click [Remove]. Then
reboot the machine and go through the installation process again.
Section 6.2 | Windows 2000
Step 1: Right-click the My Computer icon on your desktop and click [Properties].
Step 2: Then go to the Hardware tab and click [Device Manager]. Open the [Network adapters]
section. You should see your SMC2835W 2.4GHz 54 Mbps Wireless Cardbus Adapter in this
menu. Right-click your adapter and click [Properties].