SMC Networks EZ Networking SMC1255TX User Manual page 26

I
NSTALLATION
7. Choose the location where the program icons will be located
and click "Next."
8. Check the "To launch EtherGuard" box and click "Finish" to
complete the installation and launch the EtherGuard program.
The EtherGuard program may also be started by clicking
"Start/Programs/EtherGuard/EtherGuard." The program will
start and then run in the background. A globe icon will appear
on the toolbar (see the figure on the next page). Double-click
the icon to bring the program to the foreground.
See the following section for EtherGuard configuration
instructions, or go to "WiNeTool" on page 23 for WiNeTool
configuration instructions.
16