Advertisement
OPERATION
Attaching the Mission Critical Wireless
Adapter to the Radio's Universal Connector
Below are the steps to attach the Mission Critical
Wireless Adapter PMLN5792 to the radio's
universal connector:
1. Ensure that the radio is turned off before
attaching the adapter to the radio.
2. Remove the universal connector cover from
the side of the radio.
3. Insert the bottom hooked end of the adapter
into the radio's bottom slot. Pivot the top of the
adapter towards the radio, then engage the
adapter's spring loaded latch in the radio's top
slot. Refer to Figure 1 Mission Critical Wireless
Adapter.
4. Secure the adapter to the radio using the
tethered screw.
1
Advertisement
