Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Work Pro LW 415R PRO
Summary of Contents for Work Pro LW 415R PRO
- Page 1 PRO LIFTING TOWERS Installation & User Manual LW 415R LW 425R Rev. 13.5.1...
-
Page 3: Table Of Contents
INSTALLATION & USER MANUAL LIFTERS INSTALLATION & USER MANUAL LIFTERS INTRODUCTION LW 415 R FEATURES LW 425 R SPECIFICATIONS FASTENER SYSTEM (explanation) SAFETY RULES INSTALLING THE LIFTING TOWER PLACING THE LOAD WINCH OPERATION (Special care) LIFTING PROCESS DESCENT/FOLDING PROCESS CONFORMITY DECLARATION BGV C1, EXPLANATION &... -
Page 4: Introduction
INTRODUCTION FEATURES 400 series has been a big change in the way of work when professionals needs to lift heavy These towers have a light inclination (2º) over the vertical axis in loads. The big success resides in the loading at the ground level avoiding unnecessary efforts order to displace the gravity centre to the opposite side of the that before can not be solved easily. -
Page 5: Specifications
SPECIFICATIONS SPECIFICATIONS FASTENER SYSTEM (explanation) DISPLAYED TOWER FOLDED TOWER LOAD LOAD HEIGHT BASE HEIGHT BASE WEIGHT (KG) (KG) (KG) The fastener system operates in following way: LW 415 R 2,20 x 1,70 1,89 0,48 x 0,50 We turn clockwise the winch that thighten the cable and thanks LW 425 R 2,20 x 1,70 1,89... - Page 6 SAFETY RULES SAFETY RULES LOAD Do not elevate the tower Do not move the tower without using the stabilize after the load is elevated legs. Place the tower over a flat Do not lean elements (like and stable surface. stairs, platforms, scaffoldings, Do not install it in a place etc.) over the tower which can where the use over the...
-
Page 7: Safety Rules
SAFETY RULES SAFETY RULES The load must be firmly placed Keep the hands and fingers over the support the nearest moved away to mobiles Do not lubricate the brake possible gravity center of the elements of the towers system of the winch, the tower, in order to facilitate its like profile unions. -
Page 8: Installing The Lifting Tower
INSTALLING THE LIFTING TOWER INSTALLING THE LIFTING TOWER Place the tower over a flat and stable surface to install the tower, discarding its use over Rotate the crank of the stabilizer placed on each legs up to the wheels located in the base rolling platforms or surfaces which would be able to bear as much its own weight as coupled do not touch the ground. - Page 9 PLACING THE LOAD PLACING THE LOAD Support in stand position for transport. HINT: IT IS POSSIBLE TO OBTAIN AN EXTRA HEIGHT, FLIPING THE SUPPORT. FOR THIS Extract the pin bolts and place it in CENTRAL SCREW AND TO CHANGE THE OPERATION, YOU MUST RETIRE THE horizontal position in order to locate POSITION ON THE SUPPORT PIECE.
-
Page 10: Winch Operation (Special Care)
WINCH OPERATION ( SPECIAL CARE) LIFTING PROCESS During the tower elevation process, pay attention to the cable rolling. NOTE: BEFORE ELEVATING THE TOWER, CHECK THAT ALL BOLTS ARE This cable must the coiled in parallel turns around the winch cylinder NEVER MUST IN BLOCK POSITION. -
Page 11: Descent/Folding Process
LIFTING PROCESS DESCENT/FOLDING PROCESS For the descent, we must to unblock the lower security bolt and turn the winch on inverse sense, the load bring down the profile up to the stand position. In that moment, we must to block the bolt for the transport use and we must unblock the new security bolt from the descended profile. -
Page 12: Conformity Declaration
DESCENT/FOLDING PROCESS Place them in the leg transport enclosure CONFORMITY DECLARATION Now the tower is prepared for transport. The described Truss-Lifts meets all the requirements specified in the Directive 2006/42/EC of the European Parliament and the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC. - Page 13 BGV C1 REGULATION, Explanation BGV C1, TESTS & CHECKS BGV C1 is a regulation for Staging and Production Facilities for the Entertainment Industry. Lifting and rigging equipment is just part of this MODEL SERIAL NUMBER standard and cover structures and other technical matters. Adopting BGV C1 is entirely voluntary (except in Germany) but its adoption is INITIAL CHECK (First year)
- Page 14 ANNUAL TEST ( passing the fourth year Checked by Date Signature Tested elements and conclusions ANNUAL TEST ( passing the fourth year Checked by Date Signature Tested elements and conclusions ANNUAL TEST ( passing the fourth year Checked by Date Signature Tested elements and conclusions...
Need help?
Do you have a question about the LW 415R PRO and is the answer not in the manual?
Questions and answers