6- Use - Haier WS53GDA User Manual

GB
6.1 Before first use
▶
Remove all packaging materials. This includes the foam base and all adhesive tape
holding the wine cellar accessories inside and outside. Keep them out of children's
reach and dispose them in an environmentally friendly manner.
▶
Clean the inside and outside of the appliance with water and a mild detergent before
putting any wine in it.
▶
After the appliance has been levelled and cleaned, wait for at least 2 hours before
connecting it to the power supply. If your wine cellar has been tilted for any reason,
wait 24 hours before plugging it in. See section INSTALLATION.
▶
Once you have plugged the unit into an electrical outlet, let the unit run for at least 30
minutes to acclimatize itself before making any adjustments.
▶
The temperature is automatically set to 12 °C for both compartments. If desired, you
can change the temperature manually. Please see TEMPERATURE.
6.2 Touch keys
The buttons on the control panel are touch keys, which respond when lightly touched with
the finger.
6.3 Switching the appliance on/off
To turn the appliance on, press the power button (F) for 3 seconds. To turn it back off, press
the power button again.
WARNING!
▶ To prolong the service life of the appliance, avoid turning it off.
▶ Wait at least 5 minutes to reconnect the power after the power has been discon-
nected.
When the appliance is powered on for the first time, the actual temperature of the com-
partment (B) is displayed.
Notice: Presettings
▶ Once you have plugged the unit into an electrical outlet, let the unit run for at least
30 minutes to acclimatize itself before making any adjustments
▶ When the appliance is switched on after disconnection from the main power supply,
it may take several hours for the correct temperatures to be reached. The exact time
varies depending on the environment and the temperature setting.
Notice: Memory function during power interruption
After restoration of power, the appliance continues with the temperature setting that
was set before the power failure.
6.4 Standby-mode
The display screen is dimmed automatically 35 seconds after the last key has been pressed.
It lights up automatically when any key is touched or the door is opened.

6- Use

13