Gprs - Nokia 5100 User Manual

M e n u f u n c t i o n s
• The user of the sending phone selects the desired IR function to
start data transfer.
If data transfer is not started within two minutes after the activation
of the IR port, the connection is cancelled and has to be started
again.
IR connection indicator
• When is shown continuously, the IR connection is activated
and your phone is ready to send or receive data via its IR port.
• When blinks, your phone is trying to connect to the other
device or a connection has been lost.

GPRS

GPRS connection
You can set the phone to automatically register to a GPRS network
when you switch the phone on. Press Menu, and select Connectivity,
and
GPRS, GPRS connection
up application, or sending/receiving multimedia messages creates the
connection between phone and network and data transfer is possible.
When you end the application, GPRS connection is ended but the
registration to the GPRS network remains.
If you select needed, the GPRS connection is established when
When
an application needs it and closed when you end the application.
GPRS modem settings
You can connect the phone via infrared or data cable connection to a
compatible PC and use the phone as a modem to enable GPRS
connectivity from the PC.
Press Menu, and select Connectivity,
Select and activate the access point you want to
Active access point
use. Select Edit active access point
• Scroll to
Alias for access point
you would like for the activated access point and press OK.
• Scroll to GPRS access point
Point Name (APN) and press OK.
69
online. Starting a WAP or PC dial-
Always
GPRS and GPRS modem
to change the access point settings.
and press Select. Key in the name
and press Select. Key in the Access
settings.