Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for monolith 35373
Summary of Contents for monolith 35373
- Page 1 MM-3 Powered Multimedia Speakers with Bluetooth® P/N 35373, 35374 User's Manual...
-
Page 2: Safety Warnings And Guidelines
SAFETY WARNINGS AND GUIDELINES Please read this entire manual before using this device, paying extra attention to these safety warnings and guidelines. Please keep this manual in a safe place for future reference. This device is intended for indoor use only. ... -
Page 3: Customer Service
FEATURES 3" polypropylene cone woofer 3/4" silk dome tweeter 50Hz ~ 22kHz frequency response Dual class D amplifiers with 2x 15 watts to the woofers and 2x 8 watts to the tweeters Bluetooth® version 4.0 radio with the Qualcomm® aptX™ audio codec ... -
Page 4: Product Overview
PRODUCT OVERVIEW Front View 1. Tweeter 2. Power Indicator 3. Woofer 4. Headphone Output 5. Wooden Isolation/Elevation Stand 6. Volume Knob... - Page 5 Rear Panel Master Speaker 1. Bluetooth® Pairing Button 2. Power Switch 3. DC Input Jack 4. 3.5mm TRS Input Jack 5. Stereo RCA Input Jacks 6. Speaker Output Connector Slave Speaker 7. Speaker Input Connector...
-
Page 6: Installation
INSTALLATION 1. Ensure that the Power Switch on the rear panel of the Master Speaker is in the OFF position. 2. Rotate the Volume Knob on the Master Speaker fully counterclockwise. 3. Plug one end of the included Speaker Connection Cable into the Speaker Input Connector on the rear panel of the Slave Speaker, then plug the other end into the Speaker Output Connector on the rear panel of the Master Speaker. -
Page 7: Operation
Note that once paired with your mobile device, the speakers will remember the pairing. To reconnect after the connection has been broken, open the Bluetooth settings on your mobile device and select Connect to re-establish the connection. OPERATION Note that the output of the speakers is the sum of all inputs. Unless you specifically want to listen to a mix of different sources, only one audio input should be in active use at a time. -
Page 8: Specifications
SPECIFICATIONS Model 35373 (white) and 35374 (black) Woofer Driver 3" polypropylene cone Tweeter Driver 3/4" silk dome Amplifier Type Class D Woofer Amplifier Power 2x 15 watts Tweeter Amplifier Power 2x 8 watts Inputs 1x 3.5mm TRS, 1x stereo RCA, 1x Bluetooth Output 1x 3.5mm TRS headphone... - Page 9 may be required to correct any interference to radio or television communications at your own expense. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation.
- Page 10 Radio Notice for Industry Canada Caution This IC RSS-210 radio device operates on a non-interference basis with other devices operating at this frequency. Any changes or modification to said product not expressly approved by Monoprice, including the use of non-approved antennas, could void the user’s authority to operate this device.