Safety Section TruStitch Regulator Components Pre-installation Instructions Installation Instructions Indicator LED Identification Activating Stitch Regulation Machine Operation Using the Stitch Regulator TruStitch Accessories Tips and Techniques Limited Warranty Coverage Recommended for Use with the HQ Sweet Sixteen and TruStitch 2 www.TruStitch.com...
Page 3
Laser Safety Information CLASS 1 Laser Product receiver is connected. The TruStitch™ controller contains an invis- • Consult the dealer or an experienced radio/ ible laser device that complies with stringent TV technician for help.
Page 4
Caution – Do not attempt to replace the plus proche. battery. Your warranty is void if you at- tempt to do so. Contact Handi Quilter or an Le TruStitch™ controller utilise une pile authorized Handi Quilter representative for lithium rechargeable pour son énergie.
Page 5
However, receives the motion information from the if you experience symptoms such as persist- TruStitch controller and converts it to a for- ent or recurring discomfort, pain, throb- mat the HQ Sweet Sixteen can use to control bing, aching, tingling, numbness, burning the stitching speed.
When that blue machine, package them well and ship light disappears, the Controller is fully them to Handi Quilter. But, first, call charged and ready for use. your HQ Rep or Handi Quilter to make 6 www.TruStitch.com...
Power Module Connector (DC IN) Controller Charging Port (USB Foot Pedal Connector (FOOT CHARGER) PEDAL) OFF/ON Switch Machine Interface Cable Port (MACHINE) Figure 2. TruStitch Receiver Connectors/Ports/Switch Foot Pedal Cable Controller Charging Cable (supplied with your Machine Interface machine) Cable Power Module Cord Figure 3.
Page 8
Figure 4. USB Mini-B style charg- Figure 5. Charging cable in- stalled. Note flat on cable is up. ing port on the TruStitch Controller. With the machine and TruStitch Controller turned off, install the Ma- chine Interface Cable Connector to the machine foot pedal port (Figure 6).
Indicator LED Identification Both the TruStitch Controller and Receiver have indicator LEDs to guide the user. Finder LED Charge Indicator LED The Controller has a flashing WHITE LED that flashes only in low light conditions, such as when it is un- Light Sensor der the quilt.
See “Verify Compat- ibility” on Page 6 for more information. Regulated Once the machine is powered up Needle Stop and the power module for the TruStitch Receiver is plugged in, the machine will DOWN DOWN recognize that the Stitch Regulator is...
Cruise (starting) speed. As the fabric and the TruStitch Stitch-Regulated Mode Turn the TruStitch Controller on by Controller are moved together, the ma-...
Using the Stitch Regulator The TruStitch Controller is designed to track the motion of the Controller across the table, not the motion of the fabric during quilting. For proper stitch regulation, always keep the controller moving with the fabric as described below.
TruStitch Accessories Two Accessories are provided with the extremely soft, you may choose to fold TruStitch Stitch Regulator to give the the edge of the quilt sandwich to stiffen quilter more flexibility in quilting. it slightly. Magnet The Magnet allows you to quilt “hands-free”...
Factory Service center manship, Handi Quilter Inc. (hereafter or other Authorized Servicer, or damage that referred to as “the warrantor”) will, for the is attributable to acts of God.