Advertisement
Quick Links
INSTALLATION INSTRUCTIONS
Product
7160-1084
GETAC K120 TABLET DOCKING STATION
This instruction sheet is for the Getac K120 Tablet docking station only. For instructions on
features, set-up, and operation of the computer, please refer to the manual provided by
Getac with the computer.
This docking station is designed to be used with a variety of Gamber-Johnson mounting
systems. Installation instructions for other Gamber-Johnson products are provided with each
individual product.
This instruction sheet is for the following products:
Item No. 7160-1084-00 No RF (External Power Supply sold separately)
Item No. 7160-1084-03 Tri RF (External Power Supply sold separately)
Getac recommends using the following Power Adapters to power the docking station. They
can be ordered from Gamber-Johnson seperately.
17057 - Auto
(12-32 Vdc input) - Available with the docking station as KIT 7170-0694
16079 - Isolated (12-32 Vdc input)
16078 - Isolated (20-60 Vdc input)
16513 - Isolated (72-110 Vdc input)
Product Mounting Disclaimer
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Revision
Rev. B
Printing Spec: PS-001
Form
INST-835
1 / 6
Advertisement
Related Manuals for Gamber Johnson 7160-1084-00
Summary of Contents for Gamber Johnson 7160-1084-00
-
Page 1: Installation Instructions
This instruction sheet is for the following products: Item No. 7160-1084-00 No RF (External Power Supply sold separately) Item No. 7160-1084-03 Tri RF (External Power Supply sold separately) Getac recommends using the following Power Adapters to power the docking station. They can be ordered from Gamber-Johnson seperately. -
Page 2: Pre-Installation Recommendations
PRE-INSTALLATION RECOMMENDATIONS Conduct a "Bench Test" Gamber-Johnson strongly advises a "bench test" be conducted to verify all electronic and software issues are resolved prior to installation: Make sure the computer is operational by itself. Insert computer into the docking station and verify that the computer is operating in the dock. -
Page 3: Feature Identification
FEATURE IDENTIFICATION Slam Latch Release Button Barrel Key Lock Upper Walls Provides docking guidance and connector protection, prevents mis-docking Lower Walls Guide Pins External Antenna - Tri RF (Optional) (2) USB 2.0 Docking Connector (Fast Charging) 1500 mA Port Indentification (Ports, see page 4) Part#/Serial# Label VESA 75mm Hole Pattern... -
Page 4: Port Identification
PORT IDENTIFICATION Power Input: 19 Vdc Ethernet (2) USB3.0 (2) HDMI (RJ45) 900 mA Serial USB3.0 USB2.0 (Fast Charging) 500 mA 1500 mA CABLE MANAGMENT FEATURES AND PROPER INSTALLATION 1.) Use Zip ties (provided) to secure each port cable to the specific strain relief feature on the dock 2.) Use Zip ties (provided) to secure bundled cables for improved routing - OPTIONAL 1.) Cable Tie Slots (Port Specific) -
Page 5: Operation - Docking
DOCKING AND UNDOCKING THE COMPUTER OPERATION - DOCKING Rotate Top 1. Insert the bottom of the tablet into the bottom cavity of the dock. The walls on the dock will guide the tablet into place. 2. Rotate the top of the tablet into the dock, overcoming the resistance until the Release Button returns to the "Latched"... - Page 6 Regulatory Certification Information Regulatory Model #: 7160-1084 GJ Model #'s & Description: 7160-1084-00 Dock-Getac K120 Tablet-No RF 7160-1084-03 Dock-Getac K120 Tablet-Tri RF Certifications: • EN 55032: 2012/AC: 2013 Class B • EN 50498:2010 • E-mark This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions.