Marine Rescue Technologies sMRT AU10 User Manual page 11

Remove the sMRT AU10 as
displayed and lift the RUBBER O-
RING up and over the ARMING
SWITCH.
Push the ARMING SWITCH
down to the [READY] position
until it clicks into place and
ensure the RUBBER O-RING is
positioned in the gap above the
ARMING SWITCH.
Reinsert the unit in the PFD and
close the access point zip
securely. The sMRT AU10 and
PFD is now ready for use.
WARNING: After arming the unit it can remain in the life jacket for
12 months until the jacket and beacon require servicing and
recertification. Before returning the unit for servicing and
recertification it must be made safe:
1. Slide the ARMING SWITCH up to the [OFF] position and
then lift and pull the RUBBER O-RING down and over the
ARMING SWITCH.
2. Ensure the RUBBER O-RING is positioned in the gap below
the ARMING SWITCH.
MRT Ltd. © 2014
sMRT AU10 User Manual v1.8
11