Mee-go Otto ISOFIX Instruction Manual page 6

4. Checking the correct use of the shoulder straps.
Always check that the shoulder straps are at the correct height for your child. The
shoulder straps should always be through the slots which are closest to the top of
your child's shoulders.
Too low Too high
5. Operating the harness buckle.
1. Put the two metal sections of the buckle connectors together.
2. Slot the two buckle connectors into the slot in the buckle until they 'click'
into place.
3. Check the harness is correctly locked by pulling the shoulder straps upwards.
To release the harness; press the red button on the buckle, the two metal sections
will release.
CAUTION! Never let your child play with the buckle.
1. 2.
Correct
3.
Click
6. Adjusting the harness.
1. To slacken the harness press the button on the front of the seat and pull the
harness shoulder straps forwards.
2. Tighten the harness by pulling the harness adjuster strap at the front of the seat.
The harness needs to be a snug fit without causing discomfort to your child.
CAUTION! Adjust the harness for a snug fit every time you place your child in
the seat.
1. 2.