1. SPECIFICATIONS ■ Dimensions ※ Tolerance is omitted Unit (mm)
Page 2
REFRIGERATOR MODEL SB30G OWNER’S MANUAL SAWAFUJI ELECTRIC CO., LTD. 3,NITTAHAYAKAWA-CHO,OTA-CITY, GUNMA 370-0344, JAPAN TEL: +81 ( 0 ) 276-56-7139 FAX: +81 ( 0 ) 276-56-6075 − 1 −...
Page 4
REFRIGERATOR DIMENSION The figure below is reference dimensions. ※ φ HEXAGON BOLT L PLATE − 3 −...
Page 5
INSTALLATION 1 ) Make sure the refrigerator in fitted horizontally. When installing in the Vehicle or Boat, make sure the refrigerator is not fitted to an unstable position. 2 ) Make sure to install the refrigerator where air flow is available. If the cooling unit air flow is contaminated, the cooling system will be degraded.
Page 6
Refrigerator DC cord Connection - = Black Cord + = Red Cord =CAUTION= * Never use the refrigerator to store gasoline or other inflammable vapors and liquids as these may cause explosion. * Do not touch the evaporator and other metal parts of the cabinet with wet hands, as this may cause frostbite.
Page 7
The product will be damaged by high voltage and high surge pulse from the power source, please utilize an automatic voltage regulator for the product. Please contact your ENGEL dealer if there are any questions regarding engine generators and the product compatibilities.
TEMPERATURE SETTING Temperature Control When using the refrigerator, please turn the dial in order to adjust the Temperature. Inside Temperature varies, depending on the outside Ambient Temperature. COOL REF. To adjust the Dial : when outside Temp 30 ℃ Dial Location Approx.
Page 9
RELOCATING THE COMPRESSOR UNIT This refrigerator’s compressor unit can be located, to 3 different locations. Extra Blower fan Horizontal installation a. Compressor unit located on the b. Compressor unit located c. Compressor unit located on the Left side. on the end. right side.
Page 10
4. Separate a cabinet and Compressor unit. 5. Bend the SUCTION PIPE straight, turn in the direction of the arrow. 6. Move the Compressor unit to the desired side of the cabinet. 7. Connect the 2 extension cords supplied. 8. Fix 4 screws by using a screwdriver. (approx. 1.18N ・...
Page 11
PLACING THE COMPRESSOR UNIT AWAY FROM THE REFRIGERATOR You can move the Compressor unit up to 1.5m away from the refrigerator. Approx . 1500mm Preparation: At this time, Use the hand gloves to avoid injury. CAUTION Do not move the DAMPER PIPE. CAUTION DAMPER PIPE 1.
Page 12
4. Separate a cabinet and Compressor unit. 5. Bend the SUCTION PIPE straight, turn in the direction of the arrow. 6. Move and anchor the Compressor unit in a well ventilated, level position. 7. Connect the 2 extension cords supplied. 8.
Page 13
【 AGENT in AUSTRALIA and NEW ZEALAND 】 ENGEL DISTRIBUTION PTY LTD. 6 Ernest Clark Road, Canning Vale, WA 6155, Australia Te l : + 61 (8) – 9455 – 5099 Fax: + 61 (8) – 9455 – 5211 E-mail: info@engelaustralia.com.au...
Need help?
Do you have a question about the SB30G and is the answer not in the manual?
Questions and answers