Troubleshooting - DeWalt DXV04T Instruction Manual

TROUBLESHOOTING

WARNING!
TO REDUCE THE RISK OF INJURY FROM MOVING PARTS
AND/OR ELECTRICAL SHOCK, TURN POWER SWITCH OFF
AND DISCONNECT GROUNDED PLUG FROM ELECTRICAL
OUTLET BEFORE PERFORMING TROUBLESHOOTING
CHECKS.
Minor problems often can be fixed without calling customer service.
PROBLEM SOLUTION
Check power cord, plugs and outlet.
Motor does not run
Ensure the on/off switch is in the ON
position ( )
Remove blockages in the suction nozzle,
suction tube, suction hose or filters.
Replace the paper or fleece bag.
Suction capacity
Check for proper installation of the filters.
decreases
Clean or replace the filters.
Empty canister, refer to Emptythe tank
under Operating instructions
.
PROBLEM
Thermal overload has been tripped:
1. Turn the vacuum off and disconnect
2. Empty the canister, if needed.
3. Allow the unit to cool.
Vacuum stops running
4. Plug the power cord into an appropriate
Check for proper installation of the filters.
Ensure filters are not damaged; replace if
Dust comes out while
necessary.
vacuuming
Ensure filter seals are in place and are
secure.
11
SOLUTION
vacuum cleaner from power source.
outlet and turn on/off switch to the ON
position ( ) to test. If vacuum will not
restart call 1-888-899-0146