Changing The Process Hold Time - Skutt Klin Operation Manual

6 - M
ODIFYING
C P
HANGING THE ROCESS
After you have entered the Process Temperature in a program and have pressed Enter, the kiln will fl ash the current
Process Hold Time alternately with HLd.
Press or once. The controller will quit fl ashing and only show the Process Hold Time in hours and minutes.
Everything to the left of the decimal is hours and everything to the right is minutes.
Single presses (pressing and letting go) will now adjust the Hold Time up
After the desired Hold Time has been reached Press
If large changes in time are required you can hold either
time at an increasingly faster rate. The maximum time that can be entered is 99 Hours and 99 Minutes.
G F
LASS IRE
H T
OLD IME
B
ASIC
P (
ROGRAMS CONTINUED
or down
to lock in the Hold Time and continue programming.
or down. Holding these keys down will change the
F S
IRING TEPS
)
.
17