Advertisement
6-1-2 Frequency tuning by ten-key input
Double click on the marked frequency indicator panel to display the ten-key
•
window. This allows direct frequency input.
Enter the desired frequency by clicking on the digits of the ten-key, including the
•
[.] if necessary.
Select [kHz] or [MHz]. The receiver will then be tuned to this frequency.
•
Click on "Close" when that panel is not needed anymore.
•
.
6-1-3 Frequency tuning by CF step
Clicking on the buttons with the white triangle, on either side of the main spectrum control bar does increment or
decrement the frequency by the step size set in the CF STEP indicator panel.
(Span, CF Step, Wheel Step indicator panel)
6-1-4 Frequency tuning with the frequency bar
A) Drag the frequency bar left or right while pressing the left mouse button.
B) Hover with the mouse over the frequency bar and scroll the mouse wheel up or down, at increments as set in the
WHEEL STEP indicator panel.
(Main spectrum control bar)
7
Advertisement
