Panasonic VL-SDM100A Operating Instructions Manual page 15

Inserting batteries into the wireless unit
Before attaching the Wireless Camera to the door, insert the batteries by performing the following
procedure.
1
Slide the slide lever (A) across and take out the battery case (B) from the wireless unit.
R Be careful not to drop the battery case when taking it out.
2
Insert the batteries.
R 4 Alkaline AA (LR6) batteries
R Do not mix old and new batteries or batteries of different types.
R Make sure that the polarity ( ,
3
Insert the battery case into the wireless unit.
R Firmly push the battery case into the wireless unit until the red label (A) cannot be seen.
4
Slide the power slide switch (B) for the power to ON.
R You can check if the power is actually on by confirming that the register indicator (C) changes
from flashing to not lit.
Note:
R Batteries have a shelf-life. Check the shelf-life listed on the batteries before using them.
A
B
) of the batteries is correct.
C
B
A
Getting Started
15