Connecting Devices To Your Tv; Connecting Cable/Tv Antenna; Auto Search Tv Channels; Atv/Dtv Channel Manual Search - Memorex MTSU5078B v2241-01 User Manual

Connecting Devices to Your TV

Connecting Cable/TV Antenna

Connect the cable/antenna wire (not included) to the TV Antenna input on the television.
Cable Box or Broadcast
TV Antenna
Antenna/Cable Mode
Before the TV can begin memorizing available
channels, you must specify the type of signal
source that is connected to the TV: antenna
(ATV) or cable (DTV).
1. Press the Input button and select TV.
2. Press Menu on the remote and use the
Arrow/Enter buttons to select Channel.
3. Use the Arrow/Enter buttons to select
Antenna Mode.
4. Use the Arrow/Enter buttons to select
Antenna or Cable, depending on the type
of input you have connected to your TV.

Auto Search TV Channels

1. Press Menu on the remote and use the
Arrow/Enter buttons to select Channel.
2. Use the Arrow/Enter buttons to select
Auto Search. When the window appears,
select "Start" to begin automatically
scanning through available channels (ATV/
Ethernet Cable
DTV, ATV only, DTV only). While searching,
press Exit at any time to stop the search.
3. After all channels are stored, the search
menu will close.
4. Press the Input button and select TV to
watch cable or broadcast television.

ATV/DTV Channel Manual Search

1. Press Menu on the remote and use the
Arrow/Enter buttons to select Channel.
2. Use the Arrow/Enter buttons to select
ATV or DTV Search. When the window
appears, use the Number Pad to enter the
digital channel number, then press Enter
to select it.

Program Edit

You can customize channels, set up favorites,
or block channels from this menu. Use the
multi-colored buttons on the remote as
indicated in the menu.
Television
9