Advanced Setup - Zhone 6738 User Manual

ZHONG 6738 User Manual
VPI (Virtual Path Identifier): The virtual path between two points in an ATM
network, and its valid value is from 0 to 255.
VCI (Virtual Channel Identifier): The virtual channel between two points in
an ATM network, ranging from 32 to 65535 (1 to 31 are reserved for known
protocols).
Encapsulation Mode: You can select LLC/SNAP-BRIDGING or VC/MUX.
Protocol: You can select the following items from the drop-down list: PPPoE,
DHCP, PPPoA, IPoA or Bridge.
PPP Username: The correct user name provided by your ISP.
PPP Password: The correct password provided by your ISP.
Use Static IP Address: If this function is disabled, the modem obtains an IP
address assigned by an uplink equipment such as BAS, through PPPoE
dial-up. If this function is enabled, the modem uses this IP address as the
WAN IP address.
SSID: The service set identification (SSID) is a unique name to identify the
router in the wireless LAN. Wireless stations associating to the router must
have the same SSID. Enter a descriptive name that is used when the
wireless client connecting to the router.
You can also check the checkbox of Automatic Configuration. Then ATM PVC
Configuration and WAN Service Configuration can be configured automatically
by system.
After finishing setting, click Apply/Save to save the settings.

5.3 Advanced Setup

Choose Advanced Setup and the submenu of Advanced Setup is shown as below:
26