Settings - Q-Matic MI2280 User Manual

Q-MATIC Queue Management Systems
Q-WIN 55.01p and q

Settings

It is possible to use the multi interface with radio and the wireless terminal together with Q-WIN version
55.01p and 55.01q. Both Q-WIN versions have settings for the multi interface with radio.
In Q-WIN 55.01p you select "Multi Interface" from the Settings menu. Then you click on the Optional
Settings tab.
In Q-WIN 55.01q you select "Interface --> Multi Interface" from the Settings menu. Then you select MI2180.
There are three settings for the wireless terminals.
Number of active radio (55.01p), Number of radio units (55.01q)
This setting specifies the number of script entries. You get two script entries for each radio unit (active radio).
Script Program
These are the script programs that will be executed when the terminal buttons are used. Enter one script
program for each terminal button.
Radio signatures
These are the radio signatures from the terminals. Each terminal button has its own signature.
There must be one script entry for each terminal button. There are three buttons on the terminals. The result
is that you need 1.5 radio units for each terminal (both script entries from one setting and one of the entries
from the next setting).
Example
Number of terminals
1
2
3
4
5
Q-WIN must learn the signature for every button on all terminals. Please read the Q-WIN Reference Manual
VOL. I, page 121 (55.01p) or Addendum, page 60 (55.01q) for information about learn radio signatures.
You can ignore the information about the character that indicates a long or short press of the terminal
button.
22
Number of radio units (active radio)
2
3
5
6
8
Q-MATIC INTERNATIONAL
Wireless solutions
057.01C