Boost A01-BR30 User Manual page 7

11. Under the 'General' tab, the wireless network parameters of the bulb are
listed (such as MAC address, IP Address). User can change bulb's SSID (listed
on the WLAN table, visible name to public), or Name (listed on the boost by
Sengled App) to a more meaningful name, such as "Living Room AP" or
"Living Room Wi­Fi". Press "Apple" to active such changes.
Under the 'Security' tab, user can change the Encryption Mode, or change
the bulb access Password. Press "Apply" to active such changes.
12. If re­configuration of the wireless network is needed, press the Setting
Menu button on the Main Control Page and click the "Network" tab.
Re­initialize all bulbs on the network and start setup wizard again.