Coin Tube Attachments - Steelmaster 200200C Owner's Manual

2. OPERATION (CONTINUED)

Coin Tube Attachments

The coin tube attachments allow you to sort coins directly into standard, paper
roll wrappers.
1) Remove the coin tray(s)
2) Insert wrapper into the coin tube with the crimped end down. Make sure the top
of the wrapper is below the top of the coin tube
3) Slide coin tube(s) into the proper coin slot
4) Set the coin roll batch quantities – see Batch Mode
5) Load coins into the hopper and press the start/stop key
6) When the selected amount of coins is obtained, the unit will stop. Remove the
full tube and repeat steps 2 & 3 above
7) Press the "Start/Stop" key to continue
6
200200C