Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Steelmaster 200200C
- Page 1 200200C Owner’s Manual 200200C Coin Counter & Sorter...
-
Page 3: Table Of Contents
TABLE OF CONTENTS 200200C Page 1. Product Views Front and Rear Views Display 2. Operation Modes Counting Mode Power Saving Mode Batch Mode Coin Tube Attachments 3. Troubleshooting Error-Message Display Codes 4. Specifications 5. Safety/Warnings Cleaning the Machine Maintenance Notice... -
Page 4: Product Views
1. PRODUCT VIEWS 200200C Front and Rear Views 1. Control Panel 2. Coin Hopper 3. Coin Trays 4. Coin Tubes 5. Handle 6. Coin Access Panel 7. Power Button... -
Page 5: Display
1. PRODUCT VIEW 200200C Display PRINT CLEAR ® PANTONE 20-1-5C PANTONE 164-2-7C PANTONE 163-2-2C PANTONE 165-1-7C 1. Start/Stop Key 2. Clear Key 3. Set Key 4. Batch Key 5. – (Minus) Key 6. + (Plus) Key 7. Print Report Key... -
Page 6: Operation Modes
2. OPERATION MODES 200200C COUNTING MODE 1) Remove all uncounted coins from the machine during the previous count 2) Batch amounts need to be a "0" for each denomination a. Press "Set" key to view batch amounts by denomination b. Press "Clear" key to set the 0.01 (penny) to 0 c. -
Page 7: Batch Mode
2. OPERATION 200200C BATCH MODE This mode allows you to batch a specific quantity of each coin denomination. Standard batch quantities for coin rolls: Coin Batch Amount Pennies Nickels Dimes Quarters Dollars Custom batch quantities: 1) Press "Set" Key to view batch amounts by denomination 2) Press "Batch"... -
Page 8: Coin Tube Attachments
2. OPERATION (CONTINUED) 200200C Coin Tube Attachments The coin tube attachments allow you to sort coins directly into standard, paper roll wrappers. 1) Remove the coin tray(s) 2) Insert wrapper into the coin tube with the crimped end down. Make sure the top... -
Page 9: Troubleshooting
3. TROUBLESHOOTING 200200C Error-Message Display Codes Error Code Meaning Remedy E1 - E8 Counting sensor error Clean the counting sensor Coins remaining in the Remove remaining coins machine from the machine Motor detecting sensor error Make sure 2 screws for... -
Page 10: Specifications
4. SPECIFICATIONS 200200C Specifications Dimensions: 14.2" x 11.1" x 13.4" (W x H x D) Weight: 9.3 lbs Counting Speed: 345 coins/min Power Consumption: Maximum 45W Power Source: 110VAC / 60 Hz Control Panel Screen Size: 1.5" x 2.75" Hopper Capacity... -
Page 11: Safety/Warnings
5. SAFETY/WARNINGS 200200C Cleaning the Machine Warning: Before doing any cleaning, turn the power switch off and disconnect the power cord. 1. External: a) Using a compressed air duster or soft cloth, clean all external parts of the machine. Do not use cleaning solvents. -
Page 12: Maintenance Notice
6. WARRANTY 200200C Maintenance Notice 1) Do not put fingers inside the coin hopper or channel when the machine is in operation 2) The machine must be safely connected to the power source 3) The machine must be used and kept in dry location. Do not operate in high... -
Page 13: Warranty
STEELMASTER provides a limited, one-year replacement warranty for ® this unit (200200C). This warranty is limited and conditional as the following: • One-year from the date of original purchase. Applies only to the original purchaser. All warranty claims must be accompained by the proof of purchase. - Page 14 FEATURES 200200C Notes...
- Page 15 FEATURES 200200C Notes...
- Page 16 200200C 1708072...
Need help?
Do you have a question about the 200200C and is the answer not in the manual?
Questions and answers