Sirius Satellite Radio Streamer GT SIR-SL1 User Manual page 21

Activating the Song (S-Seek) Alert
1. Press and hold the MEMO button for 3 seconds to
enter the S-Seek Mode.
2. Press and release SELECT. A pop-up screen
displaying two selectable options - "Delete" and
"S-Seek" will appear (below left).
3. Use the Channel Switch to highlight the "S-Seek"
option.
4. Press and release SELECT and an S-Seek
confirmation screen will appear. Select the "Yes"
option using the Channel Switch and press
SELECT to confirm (below right).
Memory Recall
Delete
S-Seek
With the S-Seek option enabled, whenever the
Streamer GT Receiver is turned on, it automatically
searches the incoming channels to determine if a
match exists with the program information stored in
receiver's memory. If one or more matches are
found, a pop-up screen momentarily appears for 2-
seconds and displays "S-Seek Alert". An audible
Streamer GT SIR-SL1 User Guide
beep tone will be heard indicating that a match has
been found. The display then reverts to the S-Seek
Alert screen which displays the current matches. You
can now select the Artist/Song Title or game that you
wish to listen to. No stored match alert is provided for
the currently selected channel. To ensure that no
duplicate entries are stored in memory, the Receiver
will check the stored input data to ensure the
information about to be stored is not already in
memory.
• If one or more matches are found, a list appears.
S-Seek
On
Off
• If a selection is not chosen within 10 seconds, the
NOTE: Play of the current selection will continue
until a new selection is made.
001
You can scroll through the list and select a
program using the Channel Switch. Your selection
will be tuned and the display will revert to the last
active display mode.
screen will revert to the last active display and
tuning modes.
CH NAME
12:00P A
S-Seek Alert
S-Seek Alert
Artist Name/Song
Artist Name/Song
21