Switching The Phone On/Off; Pin Code; Your Phone's Mode - Samsung SCH-X659 User Manual

G G e e t t t t i i n n g g S S t t a a r r t t e e d d

Switching the Phone On/Off

1. Press and hold for more than one second to
switch the phone on.
2. If the phone asks for a Personal Identification
Number(PIN) code, enter the PIN code supplied
with the UIM card. For further information on the
PIN code, see page 117.
The service light flashes, and an alert sounds.
When the system locates services, you can see
the idle screens on the main display.
If the phone is out of service, the No Service icon
appears in the display. In this case, you cannot
place and receive calls. You can try again later
when service is available.
Note: You can change the display language via
the Language menu option (6-2-4). See
page 107.
3. When you wish to switch the phone off, Press
and hold for more than two seconds.
24

PIN Code

The PIN code supplied with the UIM card helps you
protect the UIM card against unauthorized use.
When requested the code, key in the appropriate
code (displayed as asterisks for security). If you enter
an incorrect PIN code three times in succession, your
UIM card is blocked. To unblock the card, contact
your service provider.
You can enable or disable the code using the Card
Setup menu option (6-8-8). For further information
on the PIN code, see page 117.

Your Phone's Mode

Standby Mode
Standby is the most basic state of your phone. The
phone goes into Standby mode soon after you turn it
on, or whenever you briefly press
phone is in Standby mode, you will typically see the
current date and time. If you enter a phone number,
you can press to dial it, or press
in the internal Phonebook.
Press at any time to return to Standby mode. Be
careful; if you are on a call when you press
will return to Standby mode, but it also disconnects
the call.
G G e e t t t t i i n n g g S S t t a a r r t t e e d d
. When your
to save it
, you
25