Page 1
Ice Maker IM-65L User Manual [Revision 3.0 November 2018] READ THIS MANUAL CAREFULLY BEFORE USE – FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY DAMAGE AND MAY VOID WARRANTY. • KEEP THIS MANUAL FOR FUTURE REFERENCE. • Products covered by this manual may vary in appearance, assembly, inclusions, specifications, description and packaging.
Ice Maker IM-65L Safety When using electrical appliances, basic safety precautions should always be followed, including the following: Electric shock/electrocution hazard - NEVER immerse the electrical cord or appliance body in water. • • Indoor use only - do not use outdoors.
Ice Maker IM-65L Table of Contents Safety ..............................2 Before First Use ............................2 Parts Identification ..........................4 Operation ............................5 Water Connection ............................5 Console and Functions ..........................6 Making Ice ..............................6 Changing Ice Cube Size ........................7 Using the Start Delay Timer ........................
Ice Maker IM-65L Parts Identification Name Name Machine Body Inlet Control Valve Control Panel Scoop Ice Reservoir Cover Water Connection Plug (2) Filter Bracket (2) (not used in this Water Inlet Port configuration) Drain Port Spare locking clips and evaporator drain...
Ice Maker IM-65L Operation Use only water that is suitable for drinking. • It is recommended to have a qualified plumber install the tap connection. • Use Teflon / plumbers tape (not supplied) for all threaded tap water connections. • The length of the water inlet tube is approximately 1m. • Connect to a cold water tap only.
Ice Maker IM-65L Console and Functions The appliance features a display that provides you with information, such as function, current internal temperature etc. The console activates as soon as the appliance is connected to the electrical supply. Control Description Add Water Illuminates if there is no inlet water supply.
Ice Maker IM-65L Changing Ice Cube Size The machine allows you to customise the size of ice cubes, if required. This is done by either increasing or reducing the last stage of the ice making process (the default is 10 minutes). When the machine reaches the final stage of the ice making process, the display flashes to indicate this.
Ice Maker IM-65L Care and Maintenance • After use, switch OFF the electrical and water supplies. Remove all remaining ice, then drain the evaporator unit by removing the drain plug at the bottom-left corner until no water remains. Re-install the evaporator drain plug and open the reservoir cover approximately halfway and leave open.
Ice Maker IM-65L Troubleshooting Some maintenance activities described may be beyond the scope of some users. For procedures that you are not comfortable with or have the tools, knowledge or experience for, have the unit serviced at an authorised service centre or qualified technician.
Need help?
Do you have a question about the IM-65L and is the answer not in the manual?
Questions and answers
how do i get into ice machine to clean filter etc Dont know how to get image.