Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for PolyCool IM-A1
Summary of Contents for PolyCool IM-A1
- Page 1 IM-A1 Ice Maker User Manual [Revision1.0 February 2017] RETAIN THIS MANUAL FOR FUTURE REFERENCE PLEASE READ THIS MANUAL CAREFULLY BEFORE USE...
-
Page 2: Safety
IM-A1 Ice Maker Safety When using electrical appliances, basic safety precautions should always be followed, including the following: Electric shock/electrocution hazard - NEVER immerse the electrical cord or appliance body in water. Indoor use only - do not use outdoors. -
Page 3: Table Of Contents
IM-A1 Ice Maker Table of Contents Safety ............................. 2 Before First Use ............................2 Table of Contents .......................... 3 Parts Identification ........................4 Operation ............................5 Water Filling ..............................5 Filling Manually ............................5 Setting Up and Filling Using a Tap Connection ..................5 Console and Functions .......................... -
Page 4: Parts Identification
IM-A1 Ice Maker Parts Identification Name Name Body Drain Port Ice Dispenser Water Inlet Tube Dispensing Button Filling Cup Water Dispenser Tap Adaptor Control Panel Scoop Drip Tray Inlet Control Valve Ice Reservoir Cover Inlet Plug Water Reservoir Cover Spare Tube Collar, Locking Clips and Cap may be... -
Page 5: Operation
IM-A1 Ice Maker Operation Water Filling It is recommended to use only bottled or filtered water that is suitable for drinking. Do not use any other type of liquid, such as fruit juice. • Do not use water that has remained in the appliance for a period of time –... - Page 6 IM-A1 Ice Maker To disconnect, pull the locking clip from the connector. Push the collar in and maintain pressure on it (red arrow), then pull the tube from the connector. To fill using a tap connection: 1. Disconnect the appliance from the mains electrical supply.
-
Page 7: Console And Functions
IM-A1 Ice Maker Console and Functions The appliance features a display that provides you with information, such as current function, when more water is required etc, The console activates as soon as the appliance is connected to the electrical supply. -
Page 8: Making And Dispensing Ice And Ice Water
IM-A1 Ice Maker Making and Dispensing Ice and Ice Water If ice is made and left in the appliance, it may eventually melt – when melted, the water returns to the water reservoir. Be careful to avoid overflow from the water reservoir due to melted ice adding to the current reservoir contents. -
Page 9: Care And Maintenance
IM-A1 Ice Maker Care and Maintenance After use, drain the appliance by removing the drain cap on the rear of the unit until no water remains. Re-install drain cap and open reservoir covers approximately halfway and leave open. This helps thoroughly dry the inside of the appliance and helps prevent corrosion of surfaces. -
Page 10: Specifications
IM-A1 Ice Maker Ice not dispensing. Possible Fault Action No ice Adequate ice not yet produced. Allow appliance to create enough ice for the dispensing system to function. Ice in reservoir may be stuck together. Use scoop or other blunt, non-metallic utensil to dislodge Dispenser chute blocked ice. - Page 11 IM-A1 Ice Maker Some experts believe the incorrect or prolonged use of almost any product could cause serious injury or death. For information that may reduce your risk of serious injury or death, consult the points below and additionally, the information available at www.datastreamserver.com/safety ...
Need help?
Do you have a question about the IM-A1 and is the answer not in the manual?
Questions and answers