Power Front Seats; Rear Seat Storage; Seat Adjustment; Set Memory Functions/Recall Positions - Chevrolet SILVERADO 2019 Quick Reference Manual

POWER FRONT SEATS

SEAT ADJUSTMENTS
A. Seat Cushion Adjustment
Move the horizontal control to move the
seat forward or rearward and to tilt,
raise or lower the seat.
B. Seatback Adjustment
Move the vertical control to recline or
raise the seatback.
C. Lumbar Adjustment
Move the rear control to adjust the
lumbar support.
SET MEMORY POSITIONS
1. With the vehicle in Park, adjust the
driver's seat and power outside mirrors
to the desired positions.
2. Press and release the SET button on the
driver's door. A beep will sound.
3. Immediately press and hold button 1 or 2 until two beeps sound. Use the button that
matches the Driver Information Center welcome message indicating driver 1 or 2 (key
fob 1 or 2).
To store a seat position for more clearance when exiting the vehicle, repeat these steps
Exit button instead of button 1 or 2.
using the
RECALL POSITIONS
Press and hold button 1 or 2 or
The memory/exit positions can be programmed to be recalled automatically when the
ignition is turned on/off (for exit recall, the driver's door must be opened).
To set the automatic recall options, go to Settings > Vehicle > Seating Position > Set
Entry Memory and Set Exit Memory.

REAR SEAT STORAGE

Seatback storage is an ideal location for
charge cords, tablets, flashlights or rain
gear.
Pull the tab to access the storage com-
partment in the outboard seatbacks.
Lift up either side of the 60/40-split rear
seat to access the storage areas under
the seat.
6
Optional equipment
F
F
Exit until the set position is reached.
See Seats and Restraints in your Owner's Manual.
A
B
See Storage in your Owner's Manual.
C