Philips Sonicare 2 Series User Manual page 10

10
English
Note:When you hear 3 beeps and the yellow LED of the battery level
indicator flashes, this means the battery charge is below 10% and the
toothbrush should be recharged.
Note:To keep the battery fully charged at all times, you may keep the
Sonicare on the charger when not in use.
Features
Quadpacer
- The Quadpacer is an interval timer that has a short beep and
pause to remind you to brush the 4 sections of your mouth evenly
and thoroughly. (Fig. 8)
Smartimer
The Smartimer indicates that your brushing cycle is complete by
automatically turning off the toothbrush at the end of the brushing
cycle.
Dental professionals recommend brushing no less than 2 minutes
twice a day.
Note: If you press the power on/off button after you started the
brushing cycle, the toothbrush will pause. After a pause of 30
seconds, the Smartimer resets.
Easy-start
The Easy-start feature gently increases power over the first 14
brushings to help you get used to brushing with the Philips Sonicare
toothbrush. This Philips Sonicare toothbrush comes with the Easy-
start feature activated.
Activating or deactivating the Easy-start feature:
Place the handle in the plugged-in charger.
- To activate Easy-start:
Press and hold the power on/off button for 2 seconds. You hear 2
beeps and the battery level indicator lights up green to indicate
that the Easy-start feature has been activated.