Wiring The Snysc1 Interface - Sirius Satellite Radio SiriusConnect SNYSC1 Installation And User Manual

Wiring the SNYSC1 Interface

Power harness
Connect the yellow wire of the power harness to a suitable +12V power source in the
vehicle, which is capable of providing 1 amp of power. Connect the black wire to the
vehicle ground. (Figure 5)
The power harness for the SNYSC1 has power filter box which contains a fuse for the
12V battery connection. Figure 5 also shows the location and type of fuse, and also
the identifies the pin-outs of the power connector.
(As Viewed From the Wire End of the Plug)
No Connection
GND
Power Connector
Power Filter
with Fuse
Battery 12 VDC
No Connection
2A AGC Type Fuse
figure 5 figure 5
BATT (Yellow)
BATTERY
GND
(Black)
[
Installation
]
1