Ariston 3319089 Installation And User Manual page 45

5.2.2 Automatic connection with the browser
(as alternative to par. 5.2.1)
1. Connect to the Remote Gw Thermo
network, launch the web browser (Inter-
net Explorer, Safari, Chrome, etc.) and
enter 192.168.1.1 in the address bar.
2. Make sure that the following options are
selected:
Authentication = Wpa & Wpa2 Personal,
Authentication type = Open
3. Select your own Wi-Fi (SSID) network
and enter the password.
3. Leave the default setting DHCP = ON
4. Click "Confi rm"
5. The gateway's WEB led will start fl ash-
ing green rapidly and then turn steady
on to confi rm that the procedure was
successful. The Sensys (if present) dis-
play visualises the "
the connectivity menu is available). The
average waiting time is 2–3 minutes.
Warning!
After confi rming the procedure, your device (smartphone, PC, tablet ...) will automa-
tically disconnect from the Remote Gw Thermo network and an error message may
appear on the display, after which you may need to confi gure the gateway on your
Wi-Fi network anew.
NOTE:
If it does not work [red WEB LED lit and Sensys (if present) – if the connectivity menu
is available – visualises the "
The procedure must be repeated every time you make a change to the internet net-
work in your home (change to password, operator, router).
" icon steadily (if
" icon], repeat the aforementioned procedure.
GB
\ 45