Bosch PBS 75 A Original Instructions Manual page 13

(10) Extraction outlet
(11) Locking lever for dust box
(12) Filter element (microfilter system)
(13) Adjusting screw for belt running
Technical Data
Belt sander
Article number
Rated power input
No-load belt speed
Sanding belt length
Sanding belt width
Belt speed preselection
Self-generated/external dust extraction con-
nection
Weight according to EPTA-Procedure
01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Noise/Vibration Information
Noise emission values determined according to
EN 62841-2-4.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 93 dB(A); sound power level
104 dB(A). Uncertainty K = 3 dB.
Wear hearing protection
Total vibration values a (triax vector sum) and uncertainty K
h
determined according to EN 62841-2-4:
2 2
a = 3.5 m/s , K = 1.5 m/s
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure detailed in EN 62841
and may be used to compare power tools. They may also be
used for a preliminary estimation of vibration and noise
emissions.
The given vibration level and noise emission value represent
the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping the hands warm,
and organising workflows correctly.
Bosch Power Tools
,
(14) Protective cap
(15) Dust channel
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
3 603 BA1 0..
W
m/min
mm
mm
kg
Fitting
Pull the plug out of the socket before carrying out any
u
work on the power tool.
Dust/chip extraction
The dust from materials such as lead paint, some types of
wood, minerals and metal can be harmful to human health.
Touching or breathing in this dust can trigger allergic reac-
tions and/or cause respiratory illnesses in the user or in
people in the near vicinity.
Certain dusts, such as oak or beech dust, are classified as
carcinogenic, especially in conjunction with wood treatment
additives (chromate, wood preservative). Materials contain-
ing asbestos may only be machined by specialists.
– Use a dust extraction system that is suitable for the ma-
terial wherever possible.
– Provide good ventilation at the workplace.
– It is advisable to wear a P2 filter class breathing mask.
The regulations on the material being machined that apply in
the country of use must be observed.
Avoid dust accumulation at the workplace. Dust can
u
easily ignite.
Self-generated dust extraction with dust box (see figures
A1–A4)
Place the dust box (6) on the extraction adapter (9) until it
engages. Attach the extraction adapter (9) to the extraction
outlet (10).
To empty the dust box (6), remove the dust box (6) with the
extraction adapter (9).
Before opening the dust box (6), knock the dust box against
a firm surface as shown in the figure to loosen the dust from
the filter element.
PBS 75 A
3 603 BA1 1..
710
350
533
75
–
●
3.4
/ II
1 609 92A 4D6 | (02.10.2018)
English | 13
PBS 75 AE
750
200–350
533
75
●
●
3.5
/ II