Programming The Heating And Hot Water In 5/2 Day Mode - Danfoss 103E7 User Manual

3.4 Programming the Heating and Hot Water
in 5/2 Day Mode
1. Press PROG until SET ON TIME
appears at the top of the display
and press DAY until MOTUWETHFR
appears at the bottom of the display.
Use the + and - buttons to set the
time you would like your heating/hot
water to fi rst come on in the morning
(Event 1).
2. Press NEXT ON/OFF once only.
Use the + and - buttons to set the
time you want your heating/hot
water to go off (Event 2).
To move to the next setting, i.e.
when you would like your heating/
hot water to come on again (Event
3) press the NEXT ON/OFF button
again.
3. Continue programming the heating/
hot water ON and OFF times for
weekday Events 4, 5 & 6 as in Step 2.
4. Press the DAY button once and
SASU will appear at the bottom of
the display.
Either press COPY to keep the same
settings for Saturday and Sunday as
you have programmed for Monday
to Friday.
Danfoss Heating
PROGRAMME +
DAY
NEXT/ON/OFF
-
COPY
PROGRAMME +
DAY
NEXT/ON/OFF
-
COPY
PROGRAMME +
DAY
NEXT/ON/OFF
-
COPY
PROGRAMME +
DAY
NEXT/ON/OFF
-
COPY
PROGRAMME +
NEXT/ON/OFF
-
COPY
PROGRAMME +
NEXT/ON/OFF
-
COPY
GB
DAY
DAY
11