Led Displays; Discover And Set The Ip Address; Web Browser Poe Power Control - Dataprobe iBoot-PoE-P Quick Start Manual

LED Displays


NET IN

PoE OUT

Discover and Set the IP Address

If your network supports DHCP, the IP address of the iBoot will be automatically
assigned. Find the IP Address of the iBoot using either from the DHCP Router/Server
or use the Dataprobe Device Management Utility (DMU), available at
dataprobe.com/support-iboot-poe
See Page 3 for more in the DMU.

Web Browser PoE Power Control

Factory Default IP Address:
Factory Default Security Credentials:
Point your browser to the IP Address of the iBoot-PoE, and then enter the
Administrator Username and Password. Once the user is validated, the Control and
Status is displayed.
To control the power, click on the appropriate button. During power cycling, the
Power Status bar will indicate the temporary status, with a blue background. Once
the cycle is complete, the status bar will revert to its original condition.
iBoot-PoE-P Quick Start Guide
Power is received by the iBoot-PoE from the PSE.
Power is delivered to the Controlled Device (PD).
V180802N
DHCP Set or 192.168.1.254
User: admin Password: admin
© 2018 Dataprobe Inc.