Monitoring The Vdr100; Indicators; From A Display Device Or Software - Maretron VDR100 User Manual

VDR100 User's Manual
1 week
1 month (30 days)
1 year (365.25 days)

4.3 Monitoring the VDR100

4.3.1 Indicators

The VDR100 has three green LED indicators on its top surface:
NMEA 2000:
is initializing itself. Once this process is complete, this light will be lit a steady green to indicate
that the main processor is active. The light will blink on and off to indicate data being
transferred over the NMEA 2000
completed, it indicates that a problem has been detected.
LAN: This light will be on steadily to indicate that there is an active link connection between
the VDR100 and the attached device. The light will blink on and off to indicate data being
transferred over the LAN connection. If the light is off, then there is no active link connection.
USB: This light will indicate the operating state of the VDR100. Please refer to Section 1.6.2,
"Operating States", for details of the different states.
 Solid ON
 1 Flash
 2 Flashes
 3 Flashes
 4 Flashes
 5 Flashes
 6 Flashes

4.3.2 From a Display Device or Software

The Maretron N2KView
Vessel Recorder category that allows you to monitor or set alerts on various operating
parameters of the VDR100. Parameters that can be monitored include:
 State – this is the operating state of the VDR100. Please refer to Section 1.6.2,
"Operating States", for details of the different states.
 Memory Used – amount of data (in GB) that has been used on the USB flash drive
 Memory Available – amount of data (in GB) that can still be stored on the USB flash
drive
 Memory Capacity – the total amount of data that the USB flash drive is capable of
storing.
 Percent Used – the percent of the capacity of the USB flash drive that has been used
for storing data
 Percent Available – the percent of the capacity of the USB flash drive that is still
available for storing data
Page 12
This light will be red for several seconds after powerup while the VDR100
®
connection. If this light is lit red after the initialization has
Recording
Formatting
Erasing
No Flash Drive
Error
Initializing
Incompatible
®
software as well as the DSM150 and DSM250 display units have a
5 GBytes
21 GBytes
248 GBytes
Revision 1.2