Mounting The Door; Counter-Magnet; Environment Concerns - AEG LAVAMAT 11842 VIT User Manual

The required dimensions are given in the picture C.
The hinges will be fixed to the door by means of screws for wood (2-Fig. B) supplied with
the appliance.

• Mounting the door

Fix the hinges (1) to the machine by means of the M5x15 screws (3-Fig. B). The hinges
can be adjusted to compensate for possible uneven thickness of the door.
To align the door perfectly it is necessary to loosen the screw (3-Fig. B), adjust the door
and tighten the screw again.

• Counter-magnet (6)

The appliance is prearranged for a magnetic
closure of the door. To enable a correct opera-
tion of this device, it is necessary to screw the
counter-magnet (6) (steel disk + rubber ring)
into the inner side of the door.
Its position must correspond to the magnet (4)
on the appliance (see picture D).
If the door has to be opened from left to right, in-
vert the position of the plates (7), the magnet (4)
and the plate (5) (Fig. B and E). Mount the coun-
ter-magnet (6) and the hinges (1) as previously
described.

ENVIRONMENT CONCERNS

The symbol
treated as household waste. Instead it should be taken to the appropriate collection point
for the recycling of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate waste
handling of this product. For more detailed information about recycling of this product,
on the product or on its packaging indicates that this product may not be
Environment concerns
4
5
7
3
8
2
41
4
6
8
6
1