Power Supply • Turn the power switch off when the DA200SB is not in use. • The AC adapter should be unplugged from the AC outlet if the DA200SB will not be used for an extended period of time. • Avoid plugging the AC adapter into an AC outlet that is also powering high-consumption appliances such as electric heaters or televisions.
4. Input 2 Volume: This controls the volume level of Input 2. 5. Equalization Section: These control the overall tone of the DA200SB drum amplifier. 6. Low: This controls frequencies centered at 50Hz with a +/-12 dB sweep.
3. Ground Lift: Use this switch to eliminate hum or buzz that may exist if there is a ground loop created between stage gear and the PA system. 4. Extension Speakers Jacks: The DA200SB delivers the full 200 watts of power to the internal speakers. In addition, you may use these jacks with un-powered speakers to...
DA200SB DRUM AMPLIFIER FEATURES A Note on Stereo Imaging The Simmons DA200SB is a true stereo drum amplifier. It will maintain the integrity of the stereo drum signal from input to speakers (including Line Outs and Extension Speaker Jacks). This provides a broad...
Need help?
Do you have a question about the DA200SB and is the answer not in the manual?
Questions and answers